Appendix E
WATER METER SET FEES

EFFECTIVE: MAY 1, 2010 - APRIL 30, 2011 click here for PDF

I. Domestic, commercial, and industrial water meters

Meter Size	$Mat	$Labor	$Equip	$Outside Services	$Total
3/4" without bypass	385	83	40	0	508
1" without bypass	434	83	40	0	557
1 1/2" without bypass	868	155	64	0	1,087
2" without bypass	1,025	155	64	0	1,244
1 1/2" with 1 1/4" bypass	1,086	227	120	0	1,433
2" with 1 1/4" bypass	1,251	227	120	0	1,598
3" comp on 4" with 4" bypass	5,233	1,836	576	2,780	10,425
4" comp with 4" bypass	6,099	1,836	576	2,780	11,291
4" comp on 6" with 4" bypass	6,485	1,836	576	2,780	11,677
6" comp with 6" bypass	8,890	1,836	576	2,780	14,082
6" comp on 8" with 6" bypass	9,738	1,836	576	2,780	14,930
6" turbine with 6" bypass	8,259	1,836	576	2,780	13,451
6" turbine on 8" with 6" bypass	8,907	1,836	576	2,780	14,099
8" turbine with 8" bypass	12,369	1,836	576	2,780	17,561

Note:Mat = Materials, Equip = Equipment)

CREDIT ALLOWABLE FOR EXISTING WATER METER

Meter Size	$ Price Credit
3/4" Disc	59
1" Disc	96
1 1/2" Disc	203
2" Disc	258
3" Compound	1,494
4" Compound	2,245
6" Compound	3,395
8" Compound	4,500

Any water meter prices not shown above must be obtained through Board Service Department.

II. Special irrigation application for turbine water meters

Meter Size	$Mat	$Labor	$Equip	$Outside Services	$Total
2" Turbine	1,484	155	64	0	1,703
3" Turbine on 4" line	3,819	1,900	606	2,426	8,751
4" Turbine	4,069	1,900	606	2,426	9,001
6" Turbine	7,008	1,900	606	2,426	11,940

(Note: Mat = Materials, Equip = Equipment)

CREDIT ALLOWABLE FOR EXISTING WATER METER

Meter Size	$ Price Credit
2" Turbine with Integral Strainer	636
3" Turbine with Integral Strainer	690
4" Turbine with Integral Strainer	1,295
6" Turbine with Integral Strainer	2,968
8" Turbine with Integral Strainer	4,200

Any water meter prices not shown above must be obtained through Board Service Department.

III. Notes:

A. The above pricing does not include City of Pueblo, Pueblo County, and State of Colorado sales tax.

B. Cost of meter to owner/applicant and installation requirements are fully explained in Board Rules and Regulations.

C. Board Meter Installation Specifications include complete information regarding material furnished by the Board and other requirements.

D. The owner/applicant shall provide all necessary excavation, backfill, resurfacing, barricading/traffic control, and permits. Board shall provide excavation only for meter vaults on 3-inch and larger meters.

E. Where two or more meters serve one property and are physically connected, each service line shall have a back flow prevention device installed at the expense of the owner/applicant. In most installations, inter-connection of two or more meters will not be allowed.

F. When a building is three or more stories high and is either a commercial or multi-residential property, a check valve is required on the customer side of the meter. A check valve is also required if there is a booster pump on the customer side of the meter. All check valves will be installed at the expense of the owner/applicant.

G. Any back flow prevention devices required shall be installed and maintained by the owner/applicant at his expense.

H. Any questions regarding which cost pertains to a particular property or situation should be directed to the Board Service Department, 543-2217.

I. Under sizing of meter relative to service line shall be limited to one size classification, i.e., 3-inch on a 4-inch, 6-inch on an 8-inch. Further, any demands which are found to exceed AWWA recommended capacity of a particular size of meter will require the owner/applicant to pay all costs associated with installing the appropriate size meter.

Revised: 12/15/09
Effective: 05/01/10